As a leading water heater repair company in Phoenix, we strive to provide high-quality water repair services at an affordable rate. Our team is dedicated to solving your water heater issues quickly to reduce the amount of time you are out of hot water. Call our office today to schedule your emergency water heater repair in Phoenix!
Most people don’t think that much about their home’s hot water supply until something goes terribly wrong. It’s when an icy shower hits and the basement gets flooded that a water heater comes to the center of attention. No matter how durable appliances are today, they are still prone to damage and wear out over time.
A water heater is set in motion every time we open the tap to wash our hands, clean the dishes, or take a shower. On average, every home has a high demand for warm water per day, which is why it’s essential to have a well-operating water heater. However, it’s not always easy to identify issues and perform repairs on your own. That’s why we cover all the information about water heater repair and replacement options. With our professional help, you’ll be able to spot potential problems, resolve them quickly, and never run out of hot water again.
Need water heater repair in Phoenix? Call (602) 805-4836 or schedule service online!
Naturally, you’ll first try to fix your water heater before even considering replacement. In most cases, simple repairs can resolve most of the issues and are not as pricey as new appliances. However, you might fail to pinpoint the problem.
A water heater can malfunction for a variety of reasons, and not all of them are obvious. To help you inspect your appliance and find out what can be causing improper functioning, we cover some of the possible issues in the following section.
Noticing any signs of trouble? Don’t worry! We’ll have you sorted with quality water heater repair as soon as you contact us!
One of the first signs something is wrong with your water heater is irregular water temperature. If you notice the water is not as hot as usual, or it’s sometimes lukewarm and cold, you might need to perform a repair on the appliance.
The issue comes from the accumulation of mineral deposits inside the tank. They build up over time and cover the working parts, preventing the water heater from producing hot water. In most cases, this can be resolved by replacing old tank parts. However, the water heater replacement might be needed in severe cases.
If you notice that the water from the tap becomes cold quickly, you’ll probably have to perform a repair. There are several reasons why you might be running out of hot water too fast, and the most common one is mechanical failure.
Sometimes the thermostat settings are off, or one of the heating elements stops working and needs a replacement. In other cases, your tank might be located in the uninsulated area of the house and needs to be sealed from cold air. All in all, these mechanical failures can be fixed quickly and won’t break the bank.
It’s sometimes difficult to determine whether you need to repair or replace your water heater. We listed some of the things that will tell you when it’s time for a replacement. However, keep in mind that replacement depends on many factors. Just as minor issues might cause water heater failure, the larger ones can be resolved with a little effort.
According to the United States Department of Energy, water heaters last for about 10 to 15 years. When maintained properly, these appliances can even run for more than 20 years. Still, the lifespan of water heaters gets significantly reduced due to heavy use and improper maintenance. If your household uses a lot of hot water, you might need to replace the appliance even sooner.
Generally, you should consider replacing your water heater after ten years of use. The best would be to consult a professional and see how well your appliance performs after this age. If there are any additional performance issues, the replacement might be the safest and most reliable option.
We all know that healthy water should be colorless. If it becomes brownish or full of mysterious particles, your water heater is the root of the problem. Discolored water mostly comes from a dirty and rusty tank. While sometimes the issue can be resolved with proper cleaning, most of the time, it requires water tank replacement.
Keep in mind that water discoloration is a serious issue and might pose a threat to health in your home. If you have any doubts about your appliance having corrosion or rust, don’t hesitate to ask a professional for help and replace your old tank.
Another sign you might need to replace your water heater is loud noise. Although it’s perfectly normal for the appliance to make some noise, it shouldn’t be too loud. If there are any rambling or cracking sounds coming from the tank, you might be facing a water heater replacement.
There are several reasons why water heaters produce loud noises. Most of the time, it’s because excessive mineral deposits are covering the heating elements. This can also weaken the water heater housing and cause leaking. However, if your tank is not leaking and is fairly new, a professional might be able to clean it and save you from a costly water heater replacement.
If you notice any leaks from your water heater, it should be fixed and patched as soon as possible. Minor spills and leaks are usually not very concerning, and they can be fixed at a low cost. Nevertheless, if you notice a large puddle of water surrounding the appliance, a water heater replacement is a must. Excessive leaks could damage your property and cause issues with electrical installations.
You can reduce the need for frequent water heater repairs and prolong its lifespan with regular maintenance. Several quick and simple actions will help you keep your appliance running flawlessly for more than fifteen years. You can also save quite some money on costly repairs that come from improper maintenance.
One of the things you can do on your own is to test the TPR (temperature-pressure relief) valve. This is a safety device designed to release water when the pressure in the tank exceeds safe levels. Dirt, debris, rust, corrosion, and low temperatures might sometimes cause failures in TPR valves and prevent water heaters from working properly.
Another thing you can check every once in a while is an anode or sacrificial rod. These rods are components that protect metals from corrosion, which means they are more prone to collecting harmful buildups. By replacing the anode rod every two to three years, you provide better protection for the entire tank.
As we mentioned above, it’s good to flush the water heater occasionally and prevent heavy sediment buildups. However, if you’re not sure how to do it, you might need to call a professional. Additionally, it’s wise to consult water heater repair services if you’re not sure about any of the steps recommended above. Professionals can pinpoint potential issues and perform regular maintenance properly.
Along with all the information we already covered, we give answers to some additional questions about water heater repairs. Hopefully, that will ensure you know everything there is to maintaining, repairing, and replacing these units.
Sometimes, it’s quite challenging to find the installation date and determine the age of a water heater. However, every unit should have a label attached to it. The label contains an installation date and the serial number. If the former is missing, you can use the latter to determine the age of manufacture.
The water heater repair cost depends on many factors, with the main one being the issue that causes the problem in the first place. Simple fixes such as tightening or replacing fittings, thermostats, or other similar parts are not that pricey at all. General maintenance and performance tests are cost-efficient as well, especially on straightforward conventional water heaters.
If you have a very old water heater that needs to be flushed from excessive sediments, expect to pay some extra money. Replacing some larger parts such as a circulator pump might also be a little expensive, but nothing beats replacing an old unit with a new water heater. That will require quite an investment.
If the time came to let go of your old unit, consider getting an upgrade. The first thing to double-check is the capacity. You might need a water heater with a larger tank to meet the needs of you and your family. High efficiency is also crucial because you want to make sure the unit will provide enough hot water at all times. Therefore, look for the first-hour rating (FHR) and gallons-per-minute rating (GPM) for ultimate efficiency.
Some of the extra things you might want to consider when buying a new water heater are a user-friendly design and overall construction. A new unit should be easy to use, durable, and compact enough to fit in your desired storage area.
Without a doubt, you can perform some water heater repairs all on your own and save the extra cash. With the help of the internet, you can quickly find a guide to performing any work on each of your home appliances. However, before you pick up your DIY tools and equipment, you might want to consider the benefits of hiring a professional. There are many advantages to letting a reliable plumbing service maintain and repair your water heater, and we are about to share them with you.
Efficiency. Water heater repair companies work efficiently and are able to resolve a wide range of issues on short notice. While you might suspect something is wrong with your appliance, professionals can address the problem quickly. They can track down the source of your issue and resolve it without much effort.
Equipment. Professionals also have the necessary tools to resolve any problem that might arise along the way. Most of the DIY tools can’t compare to all the multi-purpose professional sets. Therefore, you also get to save some money on new tools by hiring a professional.
Time. One of the main benefits of hiring a professional is time. If you’re not mechanically inclined or just not sure you’ll be able to do the job flawlessly, a professional will help. Instead of wasting your time and nerves on endless repairs, you can sit back and relax knowing your appliances are in good hands.
Professional services are not that difficult to find. You can quickly find a water heater repair near your location by using Google location services. However, it’s important to put your trust in the right company. Experienced professionals will ensure outstanding results and safety even in the most challenging situations. Furthermore, a reliable company will give you some extra peace of mind by always being there for you in emergencies.
If you’re wondering who to call for water heater repairs in Phoenix, Hansen Family Plumbing and Air is an excellent choice. With more than 13 years of experience in the industry, the company offers premium plumbing services at reasonable prices. Even more important, this family-owned and oriented business cares about its customers and making long-lasting relationships with its clients.
If you happen to need any water heater services in the Phoenix metropolitan area, including installations, repairs, and replacements, Hansen Family Plumbing and Air is a company to call.